Dev:Zeiss Field Analyzer II (IROC)

This device only has partial integration at the moment. Partial integration means that measurements captured by the device are not sent to the Kordeus server. Instead, they can be saved to a shared network drive, from where they can be uploaded to Kordeus Documentation Forms, as if they were on a local disc or an USB stick connected to a computer from which Kordeus is accessed. The only requirement is that the both computers are in the same network as the file server which exposes the shared network drive.

Zeiss Field Analyzer II can export PDF reports to a shared network drive or save them on a USB stick. To enable saving to a shared network drive, open Einstellungen on the device itself. Select the Netzwerk tab. In the Netzlaufwerkkonfiguration section, click on Netzlaufwerk verbinden button, and enter the following settings:

Laufwekbuchstab = N:
Netzwerk-Pfad = \\10.10.1.9\IROC-Oeffentlich\IROC Themen\07_Messungen\Gesichtsfeld


How to import images to Kordeus

In the Berichte section of the measurement, select a measurement which needs to be exported, click Speichern and then choose N: The PDG will be saved to the mapped network drive.

On the computer where Kordeus is used, map the measurements folder as a network drive. This has to be done only once, if it has not been done already.

Follow Map a network drive instructions to set it up.

Required settings:
<drive> = any available drive
<folder> = \\10.10.1.9\IROC-Oeffentlich\IROC Themen\07_Messungen

In Gesichtsfeld tab in Kordeus Documentation form, click on upload file button, navigate to the mapped Measurements folder and find the uploaded files, select them and confirm.