Dev:Install or update DeviceDataUploader service

This service is used to monitor the configured folders for new data sent from the devices (or SerialDeviceIntegration service).

Install / update DeviceDataUpload

Prerequisits: You have dotnet 2.0 installed on the machine which is going to run the service and that dotnet.exe is accessible from everywhere (added to the PATH variable)

⚠️Add file: DeviceDataUploadRelease-1.9.zip (latest version)

If you already have DeviceDataUpload service installed

---

1. Make a zip of current C:\Program Files (x86)\b-op\DeviceDataUploaderRelease just in case
2. Start -> Type cmd -> Right click -> Als Administrator ausführen
3. Execute: cd C:\Program Files (x86)\b-op\DeviceDataUploaderRelease
4. Execute: dotnet DeviceDataUploadService.dll action:stop

If you are installing the service for the first time

---

1. Copy contents of DeviceDataUploaderRelease-x.x (except for appsettings.json) to C:\Program Files (x86)\b-op\DeviceDataUploaderRelease
2. Start -> Type cmd -> Right click -> Als Administrator ausführen
3. Execute: cd C:\Program Files (x86)\b-op\DeviceDataUploaderRelease
4. Execute: dotnet DeviceDataUploadService.dll action:install
   
   

If you need to adjust the settings, e.g. if you are adding support for another device

---

1. Start -> Editor -> Right click -> Als Administrator ausführen -> navigate to the appsettings.json (you will have to choose Alle Dateien option)

Required settings for each device can be found here

1. Execute: dotnet DeviceDataUploadService.dll action:stop
2. Execute: dotnet DeviceDataUploadService.dll action:start