Dev:IOL

Add new block in documentation mask called "IOL"

This tab is used to determine the correct lens for the operation.

The following product group structure specifies how the assignment of lenses is regulated. The doctor determines the individual product attributes (top-down) until a lens selection is finally made.

Here is another description:

Relevant for the structure begins with "Ebene 2" (Level 2).

Ebene 1	Ebene 2	Ebene 3	Ebene 4	Ebene 5
2. Implantate und Transplantate	2.1 Intraokularlinsen	2.1.1 Katarakt	2.1.1.1 Torisch	2.1.1.1.1 Asphärisch
				2.1.1.1.2 Monofokal Plus
				2.1.1.1.3 EDOF
				2.1.1.1.4 Multifokal
			2.1.1.2 Nicht Torisch	2.1.1.2.1 Sphärisch
				2.1.1.2.2 Asphärisch
				2.1.1.2.3 Monofokal Plus
				2.1.1.2.4 EDOF
				2.1.1.2.5 Multifokal
		2.1.2 Refraktiv	2.1.2.1 Torisch	2.1.2.1.1 Phake
			2.1.2.2 Nicht Torisch	2.1.2.2.1 Phake
			2.1.2.3 add on
	2.2 Hornhauttransplantate

Important! Only adopt the necessary values ​​according to the structure.

First, Doctors need to choose if there is a Toric or Non-Toric lense to be implanted. That depense as well if it is a refractive or cataract surgery (mandatory field):

Field type	Field name EN	Field name DE
Radio button	Cataract Non-Toric	Katarakt Nicht Torisch
Push button	Cataract Toric	Katarakt Torisch
Push button	Refractive Non-Toric	Refraktiv Nicht Torisch
Push button	Refractive Toric	Refraktiv Torisch

Second, the type of the lense needs to be chosen by doctors (mandatory field):

Field type	Field name EN	Field name DE
Push button	Aspheric	Asphärisch
Push button	Monofocal Plus	Monofokal Plus
Push button	EDOF (Extended Depth of Focus)	EDOF
Push button	Multifocal	Multifokal
Push button	Spheric	Sphärisch
Push button	Phakic	Phake

This entry is relevant for the price calculation.

Third, Lense needs to have a blue-light-filter? (mandatory field - except add on lens)

Field type	Field name EN	Field name DE
Radio button	Yes	Ja
Radio button	No	Nein

This information is just additional and has no impact on the selction of the category.

Normally the lens is not determined/calculated based on the conversation with the patients. This will only happen at a later date.

If the lens has not been defined yet, list the following values to chose from (optional):

Field type	Field name EN	Field name DE
Push button	Emmetropia - Maximum visual acuity at distance	Emmetropie - Maximale Sehschärfe in der Distanz
Push button	Slight myopia - maximum visual acuity at approx. 1m	Leichte Myopie - Maximale Sehschärfe bei ca. 1m
Push button	Myopia - Maximum visual acuity between 30 and 50 cm	Myopie - Maximale Sehschärfe zwischen 30 und 50 cm

Add to this section an additional comment field. This can be used to make more comments i.e. if there is also monovision.

The following data then is mostly defined in later step in the process (according to new catalogue):

• Supplier
• Article
• Stregth ot lens (dpt)
• Cylinder (dpt)
• Target refraction

All entries can be revised until the lens is definitively determined.

As soon as the final lens has been selected, this must be confirmed using an additional button. This triggers the order when planning the operation.