Stefanseiler at 15:25, 21 February 2023

2023-02-21T15:25:55Z

← Older revision		Revision as of 15:25, 21 February 2023
Line 1:		Line 1:
	Follow [[~~dev~~:Install or update SerialDeviceIntegrationService\|Install / update SerialDeviceIntegrationService]] instructions.		Follow [[Dev:Install or update SerialDeviceIntegrationService\|Install / update SerialDeviceIntegrationService]] instructions.
	<br>		<br>

Stefanseiler: Created page with "Follow Install / update SerialDeviceIntegrationService instructions.
Settings for this device, which need to be added to the SerialDeviceIntegrationServiceSetup.exe.config under “devices” are:
2023-02-21T15:25:46Z Created page with "Follow Install / update SerialDeviceIntegrationService instructions. Settings for this device, which need to be added to the SerialDeviceIntegrationServiceSetup.exe.config under “devices” are: <code> <add name="Zeiss HARK599" portName="COM4" baudRate="9600" parity="None" stopBits="One" dataBits="8" handshake="None" localFolder="D:\DeviceData\HARK599\Pickup" className="SerialDeviceIntegration.HARK599..." New page Follow [[dev:Install or update SerialDeviceIntegrationService|Install / update SerialDeviceIntegrationService]] instructions. Settings for this device, which need to be added to the SerialDeviceIntegrationServiceSetup.exe.config under “devices” are: <code> <add name="Zeiss HARK599" portName="COM4" baudRate="9600" parity="None" stopBits="One" dataBits="8" handshake="None" localFolder="D:\DeviceData\HARK599\Pickup" className="SerialDeviceIntegration.HARK599Integration"/> </code> Follow [[dev:Install or update DeviceDataUploader service|Install / update DeviceDataUploader service]] instructions. Settings for this device, which need to be added to the appsettings.json under “devices” are: { "deviceName": "Zeiss_HARK599", "deviceGID": "395d86cb-24f0-48f5-9ccd-4bf1aa9402b2", "pickupFolder": "C:\DeviceData\HARK599\Pickup", "archiveFolder": "C:\DeviceData\HARK599\Archive", "sftpUsername": "<device data uploader user name>", "sftpPassword": “<device data uploader user password>”, "sftpHost": “<application server IP>”, "sftpPort": "22", "sftpDirectory": “<ftp directory>”, "className": "DeviceDataUpload.ZeissHARK599DataUploader" } ==== Device settings ==== In the machine's settings section (see [http://baste-znl.com/zcredirect?visitid=4a1b5497-9ca7-11ed-879a-0ad3da69f49b&type=js&browserWidth=1920&browserHeight=969&iframeDetected=false&webdriverDetected=false manual] for details), set up the RS-232 parameters to: <code> baud rate = 9600 parity = None data bits = 8 stop bits = 1 flow control = None </code> Then turn of the internal printer, so that the machine sends data to external device (our computer) when the user presses PRINT button. Connect the machine to a computer with a RS-232 cable. As most modern computers do not have serial ports any more, you can use a serial to USB adapter. Note: some of the cables we have tried did not work, you might have to try a couple. [[Category:Ophthalmology]]